Ships across Canada · Prices in CAD · Tax by province

Heat · Electric 240 V

Harvia

Harvia Cilindro Sauna Heater, 6–10.5 kW (PC-E)

The Harvia Cilindro PC-E is a floor-standing stainless-steel tower heater for home saunas. We sell it in 6, 8, 9 and 10.5 kW for 240 V single-phase. It holds up to 90 kg of stones (120 kg on the 10.5 kW) and needs a separate Harvia control, which you pick with the heater.

$1,302.30

Heater alone, 6 kW size

$2,698.20 with the control and stones it needs to run

CAD, before tax · free delivery in the provinces

Pay by card or Interac e-Transfer at checkout.

Return terms are published before we open. Shipping and returns

Available to order · ships in 3–10 business days

Size
  • 6 kW, 240 V, 25 A
  • Rooms 4–8 m³ (141–294 ft³)
  • Min. wire 12 AWG (Harvia)
  • Up to 90 kg of stones

Item no. KL-PC60E

Needed to run it

Ticked for you. Untick anything you already have.

Optional extras

Total for the heater, control and stones: $2,698.20

Ask about this heater

Delivery and tax

  • Delivered by carrier.
  • Yukon, Northwest Territories and Nunavut add $600 once per order.
  • Your province's tax is added at checkout.

In short

  • Sold here in four 240 V sizes: 6, 8, 9 and 10.5 kW; other Harvia versions on request
  • Rooms from 4 m³ (141 ft³) up to 8, 12, 14 or 18 m³ by size, per Harvia's manual
  • Up to 90 kg (200 lb) of stones in an open steel cage; 120 kg (265 lb) on the 10.5 kW
  • Small footprint: 36 × 34 cm (14 × 13 in)
  • Needs a Harvia Xenio control: CX30 for the 6 kW, CX45 for 8 kW and up on one circuit

Will it work at your place?

From the maker's documents. Check permits with your town and wiring with a licensed electrician.

  1. Power

    240 V single-phase, hard-wired by a licensed electrician, and not through a GFCI (RCD), per Harvia. On one circuit the draw is 25 A for the 6 kW (12 AWG minimum), 33.4 A for an 8 kW sauna heater like the PC80E (8 AWG), 37.5 A for the 9 kW (8 AWG) and 43.75 A for the 10.5 kW (6 AWG), in copper rated 90 °C. Harvia also allows two circuits (for example 2 × 16.7 A on the 6 kW) and gives no breaker size, so your electrician sizes it to code; see our sauna electrical requirements guide.

  2. Space

    Footprint 36 × 34 cm (14 × 13 in), 101 cm (40 in) tall; the 10.5 kW is 39.5 × 38 × 115 cm. Keep 30 mm to the side and back walls, 100 mm in front and 890 mm above (830 mm for the 10.5 kW). The room must be 1900–2300 mm high (at least 1980 mm for the 10.5 kW).

  3. Permits

    Hard-wiring a 240 V heater needs a licensed electrician and, in most provinces, an electrical permit or notification. A new sauna room or outbuilding may need a building permit as well; see sauna permits in Canada.

  4. Delivery

    Ships by carrier in 3–10 business days. The control and the stones are separate items and may arrive in separate boxes.

  5. Assembly

    Nothing to build: set the heater on its legs and fix it with the wall kit. An electrician wires the heater, the control and the supplied WX248 sensor; the stones go in last.

About the Cilindro Sauna Heater

Harvia Cilindro sauna heater at a glance

The Harvia Cilindro PC-E is a round, floor-standing tower heater: a stainless-steel cage packed with stones around the heating elements. The North American PC-E version runs on 240 V single-phase. We sell four sizes: 6 kW (PC60E), 8 kW (PC80E), 9 kW (PC90E) and 10.5 kW (PC110E). Harvia's manual also lists a 6.8 kW model and 208 V three-phase versions of the 8 and 10.5 kW; those are on request.

The tall stone column is the point of the design. The 6–9 kW models hold up to 90 kg (200 lb) of stones and the 10.5 kW up to 120 kg (265 lb), a lot of stone on a small footprint. The trade-off: the Cilindro has no controls of its own, so it always ships with a separate Harvia control, and you load the stones yourself.

It is one of several sauna heaters we carry. The size selector above shows the price of each size, and the control and stones each size needs.

Which size: Harvia Cilindro 6 kW, 8 kW, 9 kW or 10.5 kW

Harvia sizes the Cilindro by the volume of the hot room (length × width × height):

  • 6 kW (PC60E): 4–8 m³ (141–294 ft³)
  • 8 kW (PC80E): 4–12 m³ (141–431 ft³)
  • 9 kW (PC90E): 4–14 m³ (141–494 ft³)
  • 10.5 kW (PC110E): 4–18 m³ (141–636 ft³)

For a log sauna, Harvia says to multiply the room volume by 1.5 before choosing. Every size starts at 4 m³, so pick by the top of the range and leave some margin if you are close to it. Our sauna heater size guide walks through the calculation.

The control and stones it needs

Every Cilindro PC-E needs a Harvia control unit. Harvia's manual lists two, and which one depends on the size and the wiring:

  • Xenio CX30: runs the 6 kW on one circuit, or any size wired on two circuits.
  • Xenio CX45: runs every size. On a single circuit, the 8, 9 and 10.5 kW need the CX45.

We plan around the single-circuit rule, so the page pairs the 6 kW with the CX30 and the larger sizes with the CX45. If your electrician wires an 8 kW or larger on two circuits, the CX30 becomes an option; ask us.

Stones: four 20 kg boxes for the 6–9 kW and six for the 10.5 kW. Harvia specifies angular, split-face stones and no soapstone. Its manual names 5–10 cm (2–4 in) stones, while the boxes usually sold with this heater in Canada are 10–15 cm; tell us if you want the smaller size.

Preparing the room for a Cilindro

The heater is the easy part; the room around it decides how well it works. Harvia's room guidance for its North American heaters calls for 2×4 framing at 16 in centres with R11 insulation, foil-backed and facing into the room. That matters most in an outdoor sauna through a Canadian winter, where an uninsulated wall soaks up heat the heater then has to replace.

Three things to settle before the electrician arrives:

  • Vents: Harvia places the fresh-air inlet about 100 mm (4 in) above the floor near the heater, and the exhaust about 150 mm (6 in) below the ceiling.
  • Sensor: the supplied WX248 temperature sensor goes where the manual's drawing shows. Mark the spot so the cable run is planned once, with the heater and control wiring.
  • Floor and walls: the heater stands on legs, but nothing combustible may sit inside its clearances, and the wall behind it has to take the fastening kit.

With those marked, the electrician can run the heater feed, the control and the sensor in one visit.

Who the Cilindro suits, and when to pick something else

The Cilindro suits a traditional home sauna where you want a large stone mass, a small footprint and a simple design, and you are happy to add a separate control.

Pick a sibling instead if:

  • you want the heater off the floor: the wall-mounted HUUM DROP holds about 55 kg of stones;
  • you prefer a closed black body with the elements kept apart from the stones: see the Harvia Virta;
  • you have no 240 V capacity to spare: see the comparison with a wood stove below.

Who it suits

A new indoor home sauna

The 6 kW covers 4–8 m³; a room of 2 × 2 × 2 m is exactly 8 m³. With the CX30 on a single circuit, it is the simplest Cilindro setup.

A larger outdoor or log sauna

Bigger rooms and log walls point to the 9 or 10.5 kW, so plan the feed from the house early. The 8 kW is the heater we pair with the Canadian Timber MiniPOD.

Replacing an older heater

If the room already has a 240 V circuit, compare its wire gauge with the minimums under power before choosing a size, and check whether the old control is a CX30 or CX45.

Specifications

Specifications: Harvia Cilindro Sauna Heater, 6–10.5 kW (PC-E)
SpecificationValue
Heater
TypeElectric floor-standing tower heater; stones in a stainless-steel cage; separate control required
Sizes sold here6 kW PC60E, 8 kW PC80E, 9 kW PC90E, 10.5 kW PC110E; 6.8 kW and 208 V three-phase on request
CodesHPCS6U1HUL, HPCS8U1HUL, HPCS9U1HUL, HPCS11U1HUL (manual prints them without UL)
Room size
6 kW4–8 m³ (141–294 ft³)
8 kW4–12 m³ (141–431 ft³)
9 kW4–14 m³ (141–494 ft³)
10.5 kW4–18 m³ (141–636 ft³)
Log wallsMultiply room volume by 1.5 (Harvia)
Room heightMin 1900 mm (75 in); 1980 mm (78 in) for 10.5 kW; ceiling max 2300 mm (7 ft 6 in)
All specifications (23 more rows: Electrical, Control, Dimensions, Stones, Clearances, Installation, Certification, Warranty)
More specifications: Harvia Cilindro Sauna Heater, 6–10.5 kW (PC-E)
SpecificationValue
Electrical
Supply240 V single-phase, 60 Hz, hard-wired by a licensed electrician; no GFCI (Harvia)
6 kW25 A one circuit (min 12 AWG) or 2 × 16.7 A (min 14 AWG)
8 kW33.4 A one circuit (min 8 AWG) or 2 × 22.3 A (min 12 AWG)
9 kW37.5 A one circuit (min 8 AWG) or 2 × 25 A (min 10 AWG)
10.5 kW43.75 A one circuit (min 6 AWG) or 2 × 29.2 A (min 8 AWG)
WireMinimum copper sizes rated 90 °C (Harvia); breaker sized by your electrician to code
Control
Control unitNot included. Xenio CX30 (6 kW, or any size on two circuits) or CX45 (all sizes)
SensorWX248 temperature sensor included
Dimensions
6–9 kW (L × W × H)340 × 360 × 1010 mm (13 × 14 × 40 in)
10.5 kW (L × W × H)380 × 395 × 1150 mm (15 × 16 × 45 in)
Weight without stones17 kg (37.5 lb) for 6–9 kW; 21 kg (46.3 lb) for 10.5 kW
Stones
CapacityMax 90 kg (200 lb) for 6–9 kW; 120 kg (265 lb) for 10.5 kW
TypeAngular split-face stones, 5–10 cm (2–4 in); no soapstone; not included
Clearances
Sides and back30 mm (1.2 in)
Front100 mm (4 in)
Ceiling890 mm (35 in); 830 mm (32.5 in) for 10.5 kW
FloorMin 70 mm (2.8 in)
Installation
VentilationSupply vent about 100 mm (4 in) above floor near heater; exhaust about 150 mm (6 in) below ceiling
Water protectionIPX4
IncludedHeater, WX248 sensor, wall fastening kit
Certification
MarkcETLus per Harvia's North American data and declaration of conformity
Warranty
Family use2 years + 1 year if registered within 30 days
Commercial use2 years; heating elements 6 months

From the maker's published specs. Anything not listed isn't published.

  1. Harvia US - Cilindro PC60E 6.0 kW 240 VAC steel (HPCS6U1HUL)Checked November 15, 2026
  2. Harvia US - Cilindro PC110E 10.5 kW 240 VAC steel (HPCS11U1HUL)Checked November 15, 2026
  3. Harvia warranty terms EN, 18.11.2025 (PDF)Checked November 15, 2026
  4. Harvia US - Warranty pageChecked November 15, 2026
  5. Harvia support - How do I select the correct heater power?Checked November 15, 2026
  6. Harvia support - How much space does the heater require around it?Checked November 15, 2026
  7. Harvia support - Ventilation in the saunaChecked November 15, 2026

Delivery

Canada-wide carrier delivery; we confirm the method by email before it ships. Ships in 3–10 business days. Delivery is free in the provinces. Yukon, the Northwest Territories and Nunavut add $600 per order. Shipping and returns

How it compares

Sizes are length (front to back) × width × height. Scroll the table sideways to see every model.

Scroll the table sideways to see all 3 models.
DetailThis oneHarvia Cilindro Sauna Heater, 6–10.5 kW (PC-E)HUUM DROP Sauna Heater, 4.5–9 kWHomecraft Sauna Heater: Revive Slim, 4–6 kW
Price (CAD)From $1,302.30From $2,698.20 with control and stonesFrom $1,259.10From $2,581.20 with control and stonesFrom $1,440From $2,182.50 with control and stones
TypeElectric 240 VElectric 240 VElectric 240 V
DesignElectric floor-standing tower heater; stones in a stainless-steel cage; separate control requiredWall-mounted electric heater, open drop-shaped steel stone cage; HUUM UKU control requiredElectric floor-standing tower heater for traditional saunas
Sizes sold here6 kW PC60E, 8 kW PC80E, 9 kW PC90E, 10.5 kW PC110E; 6.8 kW and 208 V three-phase on request4.5 kW DROP 4, 6 kW DROP 6, 7.5 kW DROP 7, 9 kW DROP 94 kW, 5 kW, 6 kW (all sold here)
Control unitNot included. Xenio CX30 (6 kW, or any size on two circuits) or CX45 (all sizes)Not included. HUUM UKU Local or UKU Wi-Fi (glass versions on request) requiredHomecraft TKE2-2 touchpad (24 V) with contactor box, indoor or outdoor; sold separately
Weight17 kg (37.5 lb) for 6–9 kW; 21 kg (46.3 lb) for 10.5 kWwithout stones11 kg (DROP 4 and 6) or 12 kg (DROP 7 and 9) without stones; about 65 kg (143.3 lb) with stones16 kg (35 lb) without rocks, all sizes
Stone loadMax 90 kg (200 lb) for 6–9 kW; 120 kg (265 lb) for 10.5 kWAbout 55 kg (121.3 lb) of 5–10 cm (2–4 in) stones; not includedUp to 45 kg (100 lb), 4 boxes; sold separately
Ceiling clearance890 mm (35 in); 830 mm (32.5 in) for 10.5 kWMin 1200 mm (47 1/4 in) above the heaterAt least 107 cm (42 in)
Room size6 kW: 4–8 m³ (141–294 ft³)8 kW: 4–12 m³ (141–431 ft³)9 kW: 4–14 m³ (141–494 ft³)10.5 kW: 4–18 m³ (141–636 ft³)4.5 kW: 3–7 m³ (106–248 ft³)6 kW: 5–9 m³ (177–318 ft³)7.5 kW: 7–11 m³ (248–389 ft³)9 kW: 8–13 m³ (283–460 ft³)4 kW: 2.4–5 m³ (100–175 ft³)5 kW: 4.3–7.8 m³ (150–275 ft³)6 kW: 7.1–9.4 m³ (250–331 ft³)
DeliveryCanada-wide carrier delivery; we confirm the method by email before it shipsCanada-wide carrier delivery; we confirm the method by email before it shipsCourier delivery

Harvia Cilindro vs HUUM DROP

The Cilindro stands on the floor and holds 90 kg of stones (120 kg in the 10.5 kW), in sizes up to 10.5 kW. The DROP hangs on the wall, holds about 55 kg and tops out at 9 kW. Both need a separate control: Harvia Xenio or HUUM UKU.

Harvia Cilindro vs Harvia Virta

Same wiring and the same control rule. The Virta is a closed black-steel heater with its elements kept apart from 50 kg (110 lb) of stones and needs 50 mm side clearance; the Cilindro is an open stone column with up to 90 kg and 30 mm. The Virta 6 kW is CA$2,224.80 against CA$1,302.30.

Electric Cilindro vs a wood-burning stove

A wood stove such as the Harvia Legend 150 needs no 240 V circuit but needs a chimney; no wood sauna stove has a Canadian listing, so check with your insurer first. The Cilindro needs a 25–43.75 A circuit and a control. See wood vs electric sauna.

Questions about the Cilindro Sauna Heater

What size Harvia Cilindro do I need for my sauna?

Work out the room volume and pick the size whose range covers it. A 2 × 2.5 m room with a 2.1 m ceiling is 10.5 m³: past the 6 kW's 8 m³, so the 8 kW (to 12 m³) is the match. Built from logs, the same room counts as 15.75 m³, which needs the 10.5 kW.

Does the Harvia Cilindro come with a control panel?

No. The box holds the heater, the WX248 temperature sensor and a wall fastening kit. The control is a separate Harvia Xenio unit, which you choose with the heater on this page.

How much does a Harvia Cilindro cost in Canada?

The heater alone runs from CA$1,302.30 (6 kW) to CA$1,521 (10.5 kW). With the control and stones it needs, a working heater comes to CA$2,698.20 for the 6 kW, CA$3,159.90 for the 8 kW, CA$3,213.90 for the 9 kW and CA$3,422.70 for the 10.5 kW, before the electrician.

Is the Harvia Cilindro approved for use in Canada?

Harvia's North American product data and its declaration of conformity list the Cilindro PC-E as cETLus, the Intertek mark that covers Canada and the US, to UL 875, CSA E60335-1/4E and CSA E60335-2-53. Some pages show only "ETL", so check the mark on the rating plate; we can confirm it before you order.

What warranty does the Harvia Cilindro have?

For family use, 2 years on the heater and its elements, plus 1 more year if you register it with Harvia within 30 days. Commercial use gets 2 years, with elements covered for 6 months, and the control units 2 years (Harvia terms, November 2025). Harvia expects a licensed electrician and an install that follows the manual.

Can I run a Harvia Cilindro on 208 V?

The four sizes we sell are 240 V single-phase. Harvia's manual lists 208 V three-phase versions of the 8 and 10.5 kW, which we can quote on request.

Guides for this choice

  • Heaters

    What size sauna heater do I need?

    What size sauna heater do you need? Measure the room in m³, add volume for glass and log walls, then match Harvia, HUUM and Homecraft room ranges.

    9 min read

  • Install and power

    Sauna electrical requirements in Canada

    What a sauna heater needs in Canada: amps, breaker and wire by kW from the manuals, GFCI rules, 120 V infrared circuits and permits by province.

    12 min read

Accessories for this heater

  • HUUM DROP electric sauna heater, drop-shaped steel cage full of round stones, front view
    Heat · Electric 240 V

    HUUM

    HUUM DROP Sauna Heater, 4.5–9 kW

    4.5–9 kW at 240 V · Wall-mounted, about 55 kg of stones · Rooms 3–13 m³ by size

    From $1,259.10From $2,581.20 with control and stones

    Available to order

  • Harvia Virta HL60E to HL90E electric sauna heater in black with stones on top, front three-quarter view
    Heat · Electric 240 V

    Harvia

    Harvia Virta Sauna Heater, 6–10.5 kW (HL)

    6–10.5 kW at 240 V · Rooms 5–18 m³ by size · Black steel, elements apart

    From $2,224.80From $3,549.60 with control and stones

    Available to order · ships in 3–10 business days