Heaters
What size sauna heater do I need?
What size sauna heater do you need? Measure the room in m³, add volume for glass and log walls, then match Harvia, HUUM and Homecraft room ranges.
Ships across Canada · Prices in CAD · Tax by province
Photos: Harvia
Harvia
The Harvia Virta HL is a black-steel, floor-standing electric sauna heater with its elements kept apart from the stones. We sell it in 6, 8, 9 and 10.5 kW for 240 V. It holds 50 kg of stones (70 kg on the 10.5 kW) and needs a separate Harvia control, which you pick with the heater.
$2,224.80
Heater alone, 6 kW size
$3,549.60 with the control and stones it needs to run
CAD, before tax · free delivery in the provinces
Pay by card or Interac e-Transfer at checkout.
Return terms are published before we open. Shipping and returns
Available to order · ships in 3–10 business days
Item no. KL-HL60E
Total for the heater, control and stones: $3,549.60
Delivery and tax
From the maker's documents. Check permits with your town and wiring with a licensed electrician.
240 V single-phase, hard-wired by a licensed electrician, and not through a GFCI (RCD), per Harvia. On one circuit the draw is 25 A for the 6 kW (12 AWG minimum), 33.4 A for the 8 kW (8 AWG), 37.5 A for the 9 kW (8 AWG) and 43.75 A for the 10.5 kW (6 AWG), in copper rated 90 °C. Harvia also allows two circuits and gives no breaker size, so your electrician sizes it to code; see our sauna electrical requirements guide.
41.5 × 34 cm (16 × 13 in) footprint, 84 cm (33 in) tall; the 10.5 kW is 41 cm deep. Keep 50 mm (2 in) to combustible surfaces on every side and 1060 mm (42 in) above. The room must be at least 1900 mm (75 in) high and 5 m³ in volume, with a fresh-air inlet low near the heater and an exhaust high up.
Hard-wiring a 240 V heater needs a licensed electrician and, in most provinces, an electrical permit or notification. A new sauna room or outbuilding may need a building permit as well; see sauna permits in Canada.
Ships by carrier in 3–10 business days. The control and the stones are separate items and may arrive in separate boxes.
Nothing to build: set it on its legs and fix it with the supplied kit. An electrician wires the heater, the control and the WX248 sensor; the stones go in last.
The Harvia Virta HL is a floor-standing electric heater with a black steel body. Its heating elements sit apart from the stones rather than buried in them, and the stones sit in an open top, so the heater reads as a solid block in the room rather than a cage.
The North American version runs on 240 V single-phase. We sell four sizes: 6 kW (HL6, also called HL60E), 8 kW (HL8), 9 kW (HL9) and 10.5 kW (HL11). Harvia also makes a 208 V three-phase 10.5 kW (HL11U3) and a 6.8 kW model; those are on request.
The Virta holds 50 kg (110 lb) of stones on the 6–9 kW and 70 kg (154 lb) on the 10.5 kW, less than Harvia's Cilindro tower but in a lower, wider body. Like the Cilindro, it has no controls of its own. The size selector above shows each size's price with the control and stones it needs.
It is one of several sauna heaters we carry.
Harvia sizes the Virta by the volume of the hot room:
The largest model is often searched as the Harvia Virta 11 kW because of its HL11 name, but it is rated 10.5 kW at 240 V.
The smallest room any Virta suits is 5 m³ (177 ft³), a little larger than the Cilindro's 4 m³. A worked example: a 2 × 2 m room with a 2.1 m ceiling is 8.4 m³, just past the 6 kW's range, so the 8 kW fits. Our sauna heater size guide shows the calculation.
Every Virta HL needs a Harvia control unit. Harvia's manual lists two:
We plan around one-circuit wiring, so this page pairs the 6 kW with the CX30 and the larger sizes with the CX45. If your electrician wires a larger size on two circuits, the CX30 becomes an option; ask us.
Stones: three 20 kg boxes for the 6–9 kW and four for the 10.5 kW. Harvia specifies angular, split-face stones and no soapstone: 5–10 cm (2–4 in) for the 6–9 kW and 10–15 cm for the 10.5 kW. The boxes sold with it in Canada are 10–15 cm; tell us if you want the smaller size for a 6–9 kW. Harvia's wooden safety railings (HL3S, HL3M) and a floor drip tray are available on request.
Harvia also makes the Virta Combi, a Virta with a built-in steamer that adds humidity to the room. It is a different heater with its own water connection, and we do not list it here. Ask us for a quote, and we will confirm the size, water supply and control before you commit.
Because the Virta is low and wide, it changes the room layout more than a tower heater does. Three points from Harvia's documents to plan before you order:
The WX248 sensor that comes with the heater is mounted where the manual's drawing shows, so mark that spot when you plan the control wiring. If you are building the room yourself, our sauna cost guide lists the other line items of a home sauna.
The Virta suits a sauna where the heater is part of the look: a solid black body, elements kept apart from the stones, in a room of 5 m³ or more.
Pick a sibling instead if:
The black steel body and open stone top suit a modern room, and Harvia's HL3S wooden railing finishes it. Plan the 50 mm clearance and a dark stone floor around it.
The 8 and 9 kW cover rooms up to 12 and 14 m³ (431 and 494 ft³). On one circuit they need the CX45 control; split over two circuits, the CX30 works.
If your room already has a Harvia CX30 or CX45, check it against the control rule above, and compare your wire gauge with the minimums under power before choosing a size.
| Specification | Value |
|---|---|
| Heater | |
| Type | Electric floor-standing heater, black steel body, elements separate from the stones; separate control required |
| Sizes sold here | 6 kW HL6, 8 kW HL8, 9 kW HL9, 10.5 kW HL11; 208 V HL11U3 and 6.8 kW on request |
| Codes | HL6U1UL, HL8U1UL, HL9U1UL, HL11U1UL (manual prints them without UL); HL11U3 is 208 V three-phase |
| Room size | |
| 6 kW | 5–8 m³ (177–294 ft³) |
| 8 kW | 5–12 m³ (177–431 ft³) |
| 9 kW | 5–14 m³ (177–494 ft³) |
| 10.5 kW | 5–18 m³ (177–635 ft³) |
| Room height | Min 1900 mm (75 in) |
| Specification | Value |
|---|---|
| Electrical | |
| Supply | 240 V single-phase, 60 Hz, hard-wired by a licensed electrician; no GFCI (Harvia) |
| 6 kW | 25 A one circuit (min 12 AWG) or 2 × 16.7 A (min 14 AWG) |
| 8 kW | 33.4 A one circuit (min 8 AWG) or 2 × 22.3 A (min 12 AWG) |
| 9 kW | 37.5 A one circuit (min 8 AWG) or 2 × 25 A (min 10 AWG) |
| 10.5 kW | 43.75 A one circuit (min 6 AWG) or 2 × 29.2 A (min 8 AWG) |
| Wire | Minimum copper sizes rated 90 °C (Harvia); breaker sized by your electrician to code |
| Control | |
| Control unit | Not included. Xenio CX30 (6 kW, or any size on two circuits) or CX45 (all sizes) |
| Sensor | WX248 temperature sensor included |
| Dimensions | |
| 6–9 kW (L × W × H) | 340 × 415 × 840 mm (13 × 16 × 33 in) |
| 10.5 kW (L × W × H) | 410 × 415 × 840 mm (16 × 16 × 33 in) |
| Weight without stones | 23 kg (50.7 lb) for 6–9 kW; 25 kg (55.1 lb) for 10.5 kW |
| Stones | |
| Capacity | 50 kg (110 lb) for 6–9 kW; 70 kg (154 lb) for 10.5 kW |
| Type | Angular split-face stones, 5–10 cm (2–4 in) for 6–9 kW, 10–15 cm for 10.5 kW; no soapstone |
| Clearances | |
| Sides, back and front | 50 mm (2 in) |
| Ceiling | 1060 mm (42 in) |
| Floor | Min 70 mm (2.8 in); dark grout and stone flooring near the heater |
| Installation | |
| Included | Heater, WX248 sensor, fastening kit |
| Certification | |
| Mark | cETLus per Harvia's North American data and declaration of conformity |
| Warranty | |
| Family use | 2 years + 1 year if registered within 30 days |
| Commercial use | 2 years; heating elements 6 months |
From the maker's published specs. Anything not listed isn't published.
Canada-wide carrier delivery; we confirm the method by email before it ships. Ships in 3–10 business days. Delivery is free in the provinces. Yukon, the Northwest Territories and Nunavut add $600 per order. Shipping and returns
Sizes are length (front to back) × width × height. Scroll the table sideways to see every model.
| Detail | This oneHarvia Virta Sauna Heater, 6–10.5 kW (HL) | Harvia Legend 150 Wood-Burning Sauna Stove, 16 kW (WK150LD) | Homecraft Sauna Heater: Revive Slim, 4–6 kW |
|---|---|---|---|
| Price (CAD) | From $2,224.80From $3,549.60 with control and stones | $2,304$2,730.60 with stones | From $1,440From $2,182.50 with control and stones |
| Type | Electric 240 V | Wood-fired | Electric 240 V |
| Design | Electric floor-standing heater, black steel body, elements separate from the stones; separate control required | Wood-burning sauna stove, black steel frame holding the stones, cast-iron glass door; no electrical connection | Electric floor-standing tower heater for traditional saunas |
| Weight | 23 kg (50.7 lb) for 6–9 kW; 25 kg (55.1 lb) for 10.5 kWwithout stones | Harvia gives two figures: 58 kg / 128 lb (manual) and 61.5 kg / 135.6 lbwithout stones | 16 kg (35 lb) without rocks, all sizes |
| Stone load | 50 kg (110 lb) for 6–9 kW; 70 kg (154 lb) for 10.5 kW | Up to 120 kg (264.6 lb), Ø 10–15 cm (4–6 in); six 20 kg boxes; not included | Up to 45 kg (100 lb), 4 boxes; sold separately |
| Room size | 6 kW: 5–8 m³ (177–294 ft³)8 kW: 5–12 m³ (177–431 ft³)9 kW: 5–14 m³ (177–494 ft³)10.5 kW: 5–18 m³ (177–635 ft³) | 6–13 m³ (212–459 ft³) | 4 kW: 2.4–5 m³ (100–175 ft³)5 kW: 4.3–7.8 m³ (150–275 ft³)6 kW: 7.1–9.4 m³ (250–331 ft³) |
| Sizes sold here | 6 kW HL6, 8 kW HL8, 9 kW HL9, 10.5 kW HL11; 208 V HL11U3 and 6.8 kW on request | One size (16 kW) | 4 kW, 5 kW, 6 kW (all sold here) |
| Codes | HL6U1UL, HL8U1UL, HL9U1UL, HL11U1UL (manual prints them without UL); HL11U3 is 208 V three-phase | WK150LD (item), LE150 (type) | Not published |
| Room height | Min 1900 mm (75 in) | 2.0 m (6.56 ft), as Harvia states | Not published |
| Delivery | Canada-wide carrier delivery; we confirm the method by email before it ships | Canada-wide freight delivery; we confirm the method by email before it ships | Courier delivery |
Same wiring and control rule. The Cilindro is an open stainless stone column with up to 90 kg of stones, 30 mm side clearance and rooms from 4 m³; the Virta is a black body with 50 kg, 50 mm clearance and rooms from 5 m³. The Cilindro 6 kW is CA$1,302.30 against CA$2,224.80.
The DROP hangs on the wall and holds about 55 kg of stones, in 4.5 to 9 kW, and needs a HUUM UKU control. The Virta stands on the floor and goes up to 10.5 kW. The DROP 6 kW costs CA$1,425.60 against CA$2,224.80 for the Virta 6 kW.
A wood stove such as the Harvia Legend 150 skips the 240 V circuit but needs a chimney; no wood sauna stove has a Canadian listing, so check with your insurer first. See wood vs electric sauna.
Yes. The HL11 (HL110E) is rated 10.5 kW at 240 V; the 11 is part of the model name. It covers 5–18 m³ (177–635 ft³), draws 43.75 A on one circuit and holds 70 kg of stones.
No. The box holds the heater, the WX248 temperature sensor and a fastening kit. The control is a separate Harvia Xenio unit, which you choose with the heater on this page.
The heater alone runs from CA$2,224.80 (6 kW) to CA$3,019.50 (10.5 kW). With the control and stones it needs, a working heater comes to CA$3,549.60 for the 6 kW, CA$3,981.60 for the 8 kW, CA$4,050.90 for the 9 kW and CA$4,779 for the 10.5 kW, before the electrician.
Harvia's North American product data and declaration of conformity list the Virta HL as cETLus, the Intertek mark that covers Canada and the US. Harvia's US pages show the shorter "ETL", so check the mark on the rating plate; we can confirm it before you order.
For family use, 2 years on the heater and its elements, plus 1 more year if you register it with Harvia within 30 days. Commercial use gets 2 years, with elements covered for 6 months; control units 2 years (Harvia terms, November 2025).
Heaters
What size sauna heater do you need? Measure the room in m³, add volume for glass and log walls, then match Harvia, HUUM and Homecraft room ranges.
Install and power
What a sauna heater needs in Canada: amps, breaker and wire by kW from the manuals, GFCI rules, 120 V infrared circuits and permits by province.

Harvia
6–10.5 kW at 240 V · Rooms 4–18 m³ by size · Floor-standing stone tower
Available to order · ships in 3–10 business days

HUUM
4.5–9 kW at 240 V · Wall-mounted, about 55 kg of stones · Rooms 3–13 m³ by size
Available to order

Harvia
16 kW wood-burning · Rooms 6–13 m³ (212–459 ft³) · 120 kg of stones, sold separately
Available to order