Ships across Canada · Prices in CAD · Tax by province

Heat · Chimney stone cover

Harvia

Harvia WL300 Legend Smoke Pipe Cover, Stone-Filled Chimney Cage

The Harvia WL300 is a black steel cage that stands on a Legend wood stove around the smoke pipe and is filled with about 40 kg of stones. The stones soak up the pipe's heat, so Harvia's minimum distance from the cover to wooden walls and benches is 165 mm, against 500 mm for a bare pipe, and you get far more stone to throw water on.

$410.35

Item alone

$552.55 with the stones it needs to run

CAD, before tax · free delivery in the provinces

Pay by card or Interac e-Transfer at checkout.

Return terms are published before we open. Shipping and returns

Available to order

  • Ø 300 × 560 mm steel cage
  • Holds about 40 kg of stones
  • 165 mm (6½ in) to wood, not 500 mm
  • For Harvia Legend stoves

Item no. KL-WL300

Needed to run it

Ticked for you. Untick anything you already have.

Total for the item and stones: $552.55

Ask about this cover

Delivery and tax

  • Delivered by courier.
  • Yukon, Northwest Territories and Nunavut add $600 once per order.
  • Your province's tax is added at checkout.

In short

  • Stone cage around the smoke pipe of a Harvia Legend wood-burning stove
  • Ø 300 × 560 mm (11.8 × 22 in), 4.6 kg (10.1 lb) empty
  • Holds about 40 kg of 10–15 cm stones (2 boxes, chosen below)
  • Harvia's figures: 165 mm from the cover to combustible walls, against 500 mm for a bare pipe
  • Works with Harvia steel chimneys and with straight or angled smoke pipes

Will it work at your place?

From the maker's documents. Check permits with your town.

  1. Base

    Stands on a layer of stones on top of the Legend stove, around the smoke pipe; nothing touches the floor.

  2. Space

    Ø 300 × 560 mm. Keep 165 mm from the cover to combustible walls and benches, 50 mm to masonry (Harvia), with the stones fully covering the pipe.

  3. Permits

    A wood stove in a sauna usually needs a building permit; your insurer may want a WETT inspection (APC in Quebec), where the cover's distances are agreed. See sauna permits in Canada.

  4. Delivery

    Courier box of about 590 × 325 × 330 mm, 5.2 kg (11.5 lb). Stones ship as separate 20 kg boxes.

  5. Assembly

    No tools needed for a straight pipe: set it on the stones round the pipe and fill it. For an angled pipe, cut a lead-through in the cage.

About the WL300 Legend Smoke Pipe Cover

A sauna chimney rock cage, made for the Legend

The bare steel pipe above a wood stove is the hottest, least useful surface in a sauna. The WL300 turns it into stone: a round black steel cage, 300 mm across and 560 mm tall, that stands on top of a Harvia Legend around the smoke pipe and is packed with stones. Harvia describes the result simply: the stones store most of the pipe's heat, the safety distance to the pipe gets much smaller, and there is a far larger stone surface for throwing water.

It is one of the sauna accessories we carry for the Harvia Legend 150.

It is a cover for the pipe, not a sauna chimney: the chimney itself (for example Harvia's WHP1500 steel chimney, or a 6 in Canadian chimney with an adapter) is a separate item.

How much it shortens the smoke pipe safety distance

Harvia's WL300 instructions draw the minimum distances to walls and benches made of combustible material, with the stones piled so they cover the pipe completely:

  • Bare single-wall smoke pipe: 500 mm (19 11/16 in)
  • With the WL300: 165 mm (6 1/2 in) from the cover, and 100 mm (4 in) from a Harvia WHP1500 insulated steel chimney above it
  • To a masonry wall: 50 mm (2 in) from the cover

The stove body keeps its own distances: 250 mm to the back on a Legend 150, or 30 mm with Harvia's WL200 sheath. The Legend manual's other option, the WZ020130 radiation cover, brings the pipe to 250 mm.

In Canada the Legend is an unlisted stove installed to CSA B365, so these reductions are Harvia's figures, not a Canadian listing. Agree the layout with your inspector or WETT inspector (APC in Quebec) before you build.

Stones: about 40 kg of 10–15 cm

Harvia says to pile about 40 kg of large stones, 10–15 cm across, as densely as possible, until the smoke pipe can no longer be seen through the bars. That is two 20 kg boxes, which you choose with the cover. They are on top of the 120 kg the Legend 150 itself takes. Re-stack them when you re-stack the stove's stones, and replace any that crumble.

Installation with a Harvia steel chimney

Install the stove and fill it with stones first, following the stove manual. Make an even layer of stones around the stove's top connection; the cover stands on that layer around the pipe (pipe up to Ø 115 mm). Fill the cover. If the insulated part of the chimney is to start right on top of the cover, fill the cover before you fit that section. For an angled pipe, cut a lead-through in the cage: Harvia's drawing keeps it to 120 mm high, at least 250 mm up from the bottom ring.

Harvia makes the WL300 to work with its WHP1500 steel chimney. Our Legend 150 page explains the 4 in to 6 in adapter a North American chimney needs.

Who it suits

A Legend in a small room

Where the pipe would sit within 500 mm of a cedar wall or the top bench, Harvia's 165 mm with the cover can make the layout work, subject to your inspector.

More steam above the stove

40 kg of extra stone above the stove gives a much bigger surface to throw water on, at the height of the upper bench.

Specifications

Specifications: Harvia WL300 Legend Smoke Pipe Cover, Stone-Filled Chimney Cage
SpecificationValue
Cover
TypeStone-filled smoke pipe cover (cage) for Harvia Legend wood-burning stoves
ColourBlack steel
Dimensions
SizeØ 300 × 560 mm (11.8 × 22 in); 324 mm across in Harvia's drawing
Weight4.6 kg (10.1 lb) empty
All specifications (8 more rows: Stones, Fit, Clearances, Certification, Shipping, Codes)
More specifications: Harvia WL300 Legend Smoke Pipe Cover, Stone-Filled Chimney Cage
SpecificationValue
Stones
Stone loadAbout 40 kg (88 lb), Ø 10–15 cm (4–6 in); not included
Fit
Stoves and chimneyHarvia Legend stoves; Harvia steel chimney WHP1500; straight or angled smoke pipe, Ø 115 mm max
Clearances
Cover to combustibles165 mm (6 1/2 in), stones covering the pipe completely
Cover to masonry50 mm (2 in)
Bare pipe, for comparison500 mm (19 11/16 in) to combustibles (Harvia)
Certification
MarksCE and EAC (European); no Canadian listing; non-electrical
Shipping
BoxAbout 590 × 325 × 330 mm (23.2 × 12.8 × 13 in), 5.2 kg (11.5 lb)
Codes
Harvia part / GTINWL300 / 6417659012973

From the maker's published specs. Anything not listed isn't published.

  1. Harvia US - Legend smoke pipe cover (WL300)Checked November 18, 2026
  2. Harvia - Legend smoke pipe cover WL300 instructions Y05-0370 B, 02/26 (PDF)Checked November 18, 2026
  3. Harvia Legend wood-burning heater instructions Y05-0136Checked November 18, 2026
  4. Harvia - Legend Protection Supplies drawing (PDF)Checked November 18, 2026

Delivery

Canada-wide courier delivery; we confirm the method by email before it ships. Available to order. Delivery is free in the provinces. Yukon, the Northwest Territories and Nunavut add $600 per order. Shipping and returns

How it compares

WL300 vs the WZ020130 radiation cover

Both shorten the smoke pipe's distance on a Legend: the radiation cover to 250 mm per the Legend manual, the stone-filled WL300 to 165 mm per its own instructions, and only the WL300 adds stones for steam.

WL300 vs a generic chimney stone cage

Other makers' cages are sized for their own stoves and flues. The WL300 is Harvia's cage for the Legend, with Harvia's published distances, which is what your inspector will ask for.

Questions about the WL300 Legend Smoke Pipe Cover

What is a sauna chimney rock cage for?

It surrounds the stove's smoke pipe with stones. The stones absorb the pipe's heat, which shortens the safety distance to walls and benches and adds stone for steam.

How much does the WL300 reduce the smoke pipe clearance?

Harvia's drawing shows 165 mm from the filled cover to combustible walls and benches, against 500 mm for a bare smoke pipe, and 50 mm to masonry. In Canada your inspector confirms the distances for an unlisted stove.

How many stones does the Harvia WL300 need?

About 40 kg of 10–15 cm stones, per Harvia, packed densely so the pipe is hidden: two 20 kg boxes, on top of the stove's own stones.

Does the WL300 fit the Harvia Legend 150?

Yes. Harvia makes it for the Legend wood-burning stoves and lists it in the Legend manual as a Legend protection supply; it takes a smoke pipe up to Ø 115 mm, straight or angled.

Can I use the WL300 with an angled smoke pipe?

Yes. Harvia says to cut a lead-through in the cage for the pipe; its drawing keeps the cut to 120 mm high and at least 250 mm above the bottom ring.

Does a sauna stove pipe need a heat shield in Canada?

It needs its clearances. For an unlisted stove such as the Legend, CSA B365 and your inspector set them; a shield or the WL300 can shorten them where the inspector accepts it.

Guides for this choice