Heaters
Wood vs electric sauna in Canada: running costs, chimneys, permits and insurance
Wood vs electric sauna in Canada: what an electric heater costs to run by province, firewood, chimney and clearances, WETT, permits and insurance.
Ships across Canada · Prices in CAD · Tax by province
Photos: Harvia
Harvia
The Harvia WL100 is wood stove floor protection made for one family of stoves: Harvia's Legend wood-burning sauna stoves. It is a black 470 × 665 mm steel plate on four adjustable feet that goes between the stove and a tiled or wooden floor, as Harvia's Legend manual requires when the stove is not on bare concrete.
$350.05
CAD, before tax · free delivery in the provinces
Pay by card or Interac e-Transfer at checkout.
Return terms are published before we open. Shipping and returns
Available to order
Item no. KL-WL100
Delivery and tax
From the maker's documents. Check permits with your town.
Goes on the floor under the stove; the four feet level it on a sloping floor. The floor below must carry the stove and stones (about 180 kg for a Legend 150). Bare concrete ≥ 60 mm (2⅜ in) needs no bedding, per Harvia.
470 × 665 mm and 60–75 mm high. It raises the stove by that much, so cut any through-wall opening or rear flue hole at the new height. Stove clearances are measured from the stove.
A wood stove in a sauna usually needs a building permit, and your insurer may ask for a WETT inspection (APC in Quebec). See sauna permits in Canada.
Courier box of about 70 × 490 × 700 mm, 11.1 kg (24.5 lb).
No tools beyond a spanner for the feet: place, level, then set the stove on it.
A wood-burning sauna stove sends heat down as well as out. The WL100 is the wood stove floor protection Harvia makes for its Legend sauna stoves, and only those: a flat plate of aluminum-zinc-coated steel, painted black, 470 × 665 mm, on four screw feet that set it 60–75 mm (2.4–3 in) above the floor. The stove stands on the plate; the air gap underneath and the steel keep the heat off the floor below.
It is one of the sauna accessories we carry for the Harvia Legend 150.
It is not a general hearth pad for a household wood stove or for another make of sauna stove: we sell it for the Legend.
Harvia's Legend manual sorts floors into three cases:
Whatever the floor, it must carry the stove's weight: about 180 kg (395 lb) for a Legend 150 with its stones. Harvia also suggests dark floor materials and grout, since ash and stone grit fall around the stove.
Harvia lists the WL100 among the Legend protection supplies in the Legend manual, alongside the WL200 protective sheath and the WL300 smoke pipe cover, and its photos show the Legend standing on it. On our Harvia Legend 150 page it is the bedding the manual means on tile or wood.
Harvia does not publish a load rating or an overhang rule for the plate. We sell it for Legend stoves only; for any other stove, use the floor protection its own maker specifies.
The Legend has no Canadian or US wood-stove listing, so in Canada it is installed to the CSA B365 installation code, and the inspector or your insurer's WETT inspector (APC in Quebec) has the last word on floor protection, which can go beyond Harvia's plate, especially in front of the door. Show them Harvia's manual and this bedding before you build. Our wood vs electric sauna guide covers the wider questions, and sauna permits in Canada the paperwork.
Set the plate where the stove will stand, with the stove's safety distances to walls and benches measured from the stove, not the plate. Turn the four feet until the plate is level and firm on all four corners; they take up a sloping floor. Then lift the stove on. Harvia notes that the bedding raises the stove, so a through-wall opening for the fire chamber or a rear flue connection must be cut at the new height. In a sauna built on a deck or slab, plan the floor first.
Wipe the plate with a damp cloth once the stove is cold; ash and grit brush off the painted steel.
Tile over a waterproof membrane is the case Harvia's instruction sheet names: the bedding keeps the stove's heat off the adhesive and membrane.
On a wood floor, the WL100 goes under the stove and a non-combustible plate or tile goes in front of the door, per Harvia. See our cottage sauna guide.
| Specification | Value |
|---|---|
| Bedding | |
| Type | Protective floor bedding for wood-burning sauna stoves |
| Material | Aluminium-zinc-coated steel sheet, painted black |
| Dimensions | |
| Size | 470 × 665 mm (18.5 × 26.2 in) |
| Height | 60–75 mm (2.4–3 in), four adjustable feet |
| Weight | 10.7 kg (23.6 lb) |
| Specification | Value |
|---|---|
| Fit | |
| Stoves | Harvia Legend sauna stoves only (Legend manual, Legend protection supplies) |
| Floors | Tile or wood floors, per Harvia; bare concrete ≥ 60 mm (2⅜ in) needs none |
| Maximum load | Not published by Harvia |
| Use | |
| Environment | Household use; interior wet area |
| Shipping | |
| Box | About 70 × 490 × 700 mm (2.8 × 19.3 × 27.6 in), 11.1 kg (24.5 lb) |
| Codes | |
| Harvia part / GTIN | WL100 / 6417659012980 |
From the maker's published specs. Anything not listed isn't published.
Canada-wide courier delivery; we confirm the method by email before it ships. Available to order. Delivery is free in the provinces. Yukon, the Northwest Territories and Nunavut add $600 per order. Shipping and returns
A bare concrete slab at least 60 mm (2⅜ in) thick with nothing cast in needs no bedding, per Harvia. Tile on its own is not enough under a Legend: Harvia asks for the bedding on top. The WL100 is a ready-made, level plate; a built hearth must meet your inspector's requirements.
They solve different distances: the WL100 protects the floor under the stove, the WL300 shortens the safety distance around the smoke pipe. Many Legend installs use both.
On bare concrete at least 60 mm (2⅜ in) thick, nothing, per Harvia. On tile, a protective bedding such as the WL100 or similar heat protection; on wood, the bedding plus non-combustible protection in front of the door.
Harvia allows a Legend on a combustible floor with its protective bedding under the stove and non-combustible floor protection in front of the door. In Canada your inspector or WETT inspector confirms what is accepted for an unlisted stove.
Yes. Harvia's manual says the adhesives and waterproofing under tiles do not resist the stove's heat, so it calls for the protective bedding or similar protection.
470 × 665 mm (18.5 × 26.2 in), 60–75 mm (2.4–3 in) high on four adjustable feet, and 10.7 kg (23.6 lb).
We sell it for Harvia's Legend sauna stoves only, the stoves Harvia names it for in the Legend manual. For a household wood stove or another sauna stove, use the floor protection that stove's maker and your inspector call for.
For an unlisted stove like the Legend, installation follows CSA B365 and your local authority; the inspector sets the floor protection, which may exceed the maker's. Harvia's own minimum is the bedding on tile or wood plus protection in front of the door.
Heaters
Wood vs electric sauna in Canada: what an electric heater costs to run by province, firewood, chimney and clearances, WETT, permits and insurance.
Choosing a sauna
Planning a cottage sauna: wood or electric with no power, uncertified stoves and CSA B365, WETT and insurance, fire bans, winterizing and safe lake dips.

Harvia
16 kW wood-burning · Rooms 6–13 m³ (212–459 ft³) · 120 kg of stones, sold separately
Available to order

Harvia
Ø 300 × 560 mm steel cage · Holds about 40 kg of stones · 165 mm (6½ in) to wood, not 500 mm
Available to order

Harvia
4 L bucket, 37.5 cm ladle · Thermo-hygrometer included · Stainless steel, wood handles
Available to order